Support hotline:0750-8319168 WhatsApp:008613392511260
-
What material frame can be cut by the chamfering machine
2019-12-14 987
What kind of frame can the chamfer cut?The angle cutting machine can also be called frame cutting machine, angle sawing machine, frame sawing machine, angle cutting saw, etc. Many customers call vario
-
How to deal with the error when the angle cutter cuts the wood
2019-12-14 946
What should we do when we use a chamfer to cut wood?First check whether the tail of the cardboard is not correct.If the tail of the slitting board is not correct, it will cause an error in the cutting
-
Basic operation method of chamfering machine
2019-12-14 819
I. Attention during operation time, strictly abide by equipment operation regulations, and achieve safe operation.2. Block the power supply before adjusting the equipment.3. Make accurate adjustments
-
Angle cutting machine for normal finishing and maintenance
2019-12-14 898
In these years, the application has been very extensive, so the finishing of the chamfering machine is very important. First, when the workpiece is used, cover it with a cover or paper on the bed surf
-
How to staple a nail angle machine
2019-12-14 825
Nailing machine for nail installation Choose the right angle nail and corresponding die head according to the thickness of the line. The commonly used angle nails are 5 #, 7 #, 8 #, 10 #, 12 #, 15 #.
-
Nail angle machine reminds you to avoid things
2019-12-14 827
What moisture can bring to the frameFirst, the water vapor in the ground will corrode our photo frames. Second, in the time of resurgence on the ground, the moisture in the ground will cause the moist
-
Common problems in the use of nail angle machine
2019-12-14 967
To make a frame, a nail angle machine is essential, but with the increase in the types of nail angle machines and the diversification of line materials, customers encounter many problems in the proces
-
What are the types of angle cutters
2019-12-14 985
Classification of angle cutting machine ① Pedal angle cutting machine Pedal angle cutting machine is a kind of full mechanical structure machine with lever as the operating principle. Excellent strip-
-
How to operate a nail angle machine
2019-12-14 795
There is a "triangular limit block" on the work surface of the photo frame nail angle machine, which needs to be adjusted in the middle. There are four screw holes on the work surface to fix
-
Reasons for inaccurate nailing by nail angle machine
2019-12-14 803
One of the reasons that the nail angle machine is not in place is that the operator does not operate as required by the machine, the nailing speed is too fast, and the striker is not in place. Therefo